How to Hard Reset TP-Link WiFi Signal Repeater?

TP-Link repeaters connect to any brand router without using any wire or cable (if your router has WPS button. you can also establish connection between the router and repeater with Ethernet cable (if your router has no WPS button).

Here, we will discuss resetting the TP-Link WiFi repeater. This reset process can dispel any big technical problem, but it also deletes the data and managed settings of the device.

So, we will start the article with the steps to hard reset the repeater and then how to adjust the repeater settings by tplinkrepeater.net interface.

Resetting TP-Link WiFi Repeater

There are easy instructions to factory reset the TP-link device. Just follow them given down here.

1. First, you have to find the repeater reset pinhole button.
2. You must use a pen to press it for 10 seconds.
3. The networking device will take 5-10 minutes to complete the reset process.
4. After resetting the TP-Link signal repeater, you have to readjust the settings by accessing the interface.

Let’s have a look how to re-manage the settings and networks of the repeater with the help of your computer via login URL tplinkrepeater.net.

Configure Repeater Settings After Resetting

To adjust the settings and networks of the repeater, you just have to connect your computer to the TP-Link device with the help of LAN cable. Then, follow simple steps given below.

1. You have to find an updated web browser in your computer.
2. Now, search the login URL tplinkrepeater.net by typing it into the address bar.
3. The interface login page will display on the computer screen.
4. You will see username and password blank fields, which you must fill.
5. The previous credentials will be deleted from the memory of the extender.
6. So, you can use the TP-Link repeater user manual, which you used during the TP Link extender setup.
7. Fill the login credentials and select the NEXT button to go to the interface menu at next page.
8. You will reach to the interface, where you can re-adjust settings and networks of the repeater easily.

Now, let’s have a look at some troubleshooting tips, so that there will be no need to reset the device in future.

Troubleshooting Tips

These below written tips will help you to solve connection and internet technical problems without resetting the TP-Link repeater.

Check Router to Repeater Link

Make sure that your repeater is connected to the router (if using Ethernet cable) correctly. The cable must be inserted in to the router’s LAN port and extender WAN port.

Connect Repeater to Router Close

If you are using WPS method to make a connection between the router and extender, then you the extender must be close by to the router.

Reboot Repeater to Dispel Issue

If above given tips are not working to provide solutions, so in this situation, you can reboot the repeater by plugging it out of the wall socket and plug it again in to socket to restart it.

In Conclusion

Here, you have seen instructions to hard reset the TP-link repeater easily. We have also shared simple steps to re-manage the repeater settings and networks using tplinkrepeater.net. then at last, you have gone through the troubleshooting tips to dispel technical problems without hard resetting the signal repeater.